Inter granular Corrosion Test (IGC) as per ASTM A-262

• Practice –A - Oxalic Acid Test
• Practice –B - Ferric sulphate –Sulphuric Acid Test
• Practice –C - Nitric Acid Test
• Practice –E - 16 % Copper –Copper Sulphate Test
• Practice –F - 50 % Copper –Copper Sulphate Test

Pitting & Crevice Corrosion test as per ASTM G48 Specification

• Method A - Ferric chloride pitting test.
• Method B - Ferric chloride crevice test
• Method C - Critical pitting temperature test for nickel-base and chromium bearing alloys.
• Method D - Critical Crevice temperature test for nickel-base and chromium-bearing alloys.
• Method E - Critical pitting temperature test for stainless steels

Inter granular Corrosion Test as per ISO 3651

Inter granular Corrosion Test in ferritic Stainless steels as per ASTM A 763

Evaluation of detrimental intermetallic phases in Duplex Austenitic/ferritic Stainless steels as per ASTM A923

Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys as per ASTM G28Mthod A - Ferric Sulfate—Sulfuric Acid Test

Sulphide Stress Corrosion Cracking Test (SSCC) as per NACE TM 0177

Hydrogen Induced Cracking Test (HIC) test as per NACE TM 0284

Mass of Coating and Coating Thickness measurement

Salt Spray Test

• Neutral Salt Spray Test -NSS
• Acetic acid-salt spray test-ASS
• Copper Chloride Acetic Acid Salt Spray Test -CASS (With automatic parameter control)